33 books like Practical Woodwork

By Charles H. Hayward,

Here are 33 books that Practical Woodwork fans have personally recommended if you like Practical Woodwork. Shepherd is a community of 11,000+ authors and super readers sharing their favorite books with the world.

Shepherd is reader supported. When you buy books, we may earn an affiliate commission.

Book cover of How to Use Woodworking Tools

Graham Blackburn Author Of Traditional Woodworking Handtools: A Manual for the Woodworker

From my list on traditional woodworking.

Why am I passionate about this?

Born in London, I apprenticed under cabinetmaker Hugh Harris before moving to New York to study at Juilliard. Subsequently pursuing a career as a professional musician, recording and playing with groups including Van Morrison, Razmataz, and Full Tilt Boogie, I built a house in Woodstock, NY. In addition to operating my own custom-design furniture-making shop, and lecturing and teaching extensively from coast to coast, I’ve written and illustrated many more books on woodworking. I’ve served as Contributing Editor to Fine Woodworking (1985–1999), and Popular Woodworking (1987–1996), and as Editor-in-Chief of Woodwork Magazine (1991–1994) before becoming a featured speaker and presenter at the National Woodworking Shows.

Graham's book list on traditional woodworking

Graham Blackburn Why did Graham love this book?

Published in 1881 this is an absolutely fundamental book for the beginner. Amply illustrated, you will learn important details such as how to hold tools and what to expect from them as well as how basic joints are formed and made. Focused on wooden tools this is information not commonly reproduced in more contemporary books.

This book is not currently available.

By R.L. Bridgman,

Why should I read it?

1 author picked How to Use Woodworking Tools as one of their favorite books, and they share why you should read it.


Book cover of The Practical Book of Period Furniture - Treating of Furniture of the English, American Colonial and Post-Colonial, and Principal, French Periods

Graham Blackburn Author Of Traditional Woodworking Handtools: A Manual for the Woodworker

From my list on traditional woodworking.

Why am I passionate about this?

Born in London, I apprenticed under cabinetmaker Hugh Harris before moving to New York to study at Juilliard. Subsequently pursuing a career as a professional musician, recording and playing with groups including Van Morrison, Razmataz, and Full Tilt Boogie, I built a house in Woodstock, NY. In addition to operating my own custom-design furniture-making shop, and lecturing and teaching extensively from coast to coast, I’ve written and illustrated many more books on woodworking. I’ve served as Contributing Editor to Fine Woodworking (1985–1999), and Popular Woodworking (1987–1996), and as Editor-in-Chief of Woodwork Magazine (1991–1994) before becoming a featured speaker and presenter at the National Woodworking Shows.

Graham's book list on traditional woodworking

Graham Blackburn Why did Graham love this book?

Photographs and detailed line drawings cover virtually the entire history of European furniture construction. Not merely a catalogue this book goes into minute detail about construction of the finest furniture that was ever made by hand from clockcases to bedsteads. It explains stylistic details as well as actual methods.

By Harold Donaldson Eberlein, Abbot McClure,

Why should I read it?

1 author picked The Practical Book of Period Furniture - Treating of Furniture of the English, American Colonial and Post-Colonial, and Principal, French Periods as one of their favorite books, and they share why you should read it.

What is this book about?

Many of the earliest books, particularly those dating back to the 1900s and before, are now extremely scarce and increasingly expensive. We are republishing these classic works in affordable, high quality, modern editions, using the original text and artwork.


Book cover of Antique Woodworking Tools: A Guide to the Purchase, Restoration and Use of Old Tools for Today's Shop

Graham Blackburn Author Of Traditional Woodworking Handtools: A Manual for the Woodworker

From my list on traditional woodworking.

Why am I passionate about this?

Born in London, I apprenticed under cabinetmaker Hugh Harris before moving to New York to study at Juilliard. Subsequently pursuing a career as a professional musician, recording and playing with groups including Van Morrison, Razmataz, and Full Tilt Boogie, I built a house in Woodstock, NY. In addition to operating my own custom-design furniture-making shop, and lecturing and teaching extensively from coast to coast, I’ve written and illustrated many more books on woodworking. I’ve served as Contributing Editor to Fine Woodworking (1985–1999), and Popular Woodworking (1987–1996), and as Editor-in-Chief of Woodwork Magazine (1991–1994) before becoming a featured speaker and presenter at the National Woodworking Shows.

Graham's book list on traditional woodworking

Graham Blackburn Why did Graham love this book?

Known primarily as one of America’s foremost Windsor chairmakers Michael Dunbar’s book is a great guide to the purchase, restoration, and use of old traditional wooden tools for today’s shop. This book explains and illustrates how and why so many apparently ‘antique’ tools still do the job they were designed to do, often much better and faster than many contemporary tools.

By Michael Dunbar,

Why should I read it?

1 author picked Antique Woodworking Tools as one of their favorite books, and they share why you should read it.

What is this book about?

A professional woodworker who specializes in antiques offers modern craftsmen advice on buying, restoring, and using the principal general-purpose tools of preindustrial woodworkers


Book cover of Ancient Carpenters' Tools: Illustrated and Explained, Together with the Implements of the Lumberman, Joiner and Cabinet-Maker in Use in the Eighteenth Century

Graham Blackburn Author Of Traditional Woodworking Handtools: A Manual for the Woodworker

From my list on traditional woodworking.

Why am I passionate about this?

Born in London, I apprenticed under cabinetmaker Hugh Harris before moving to New York to study at Juilliard. Subsequently pursuing a career as a professional musician, recording and playing with groups including Van Morrison, Razmataz, and Full Tilt Boogie, I built a house in Woodstock, NY. In addition to operating my own custom-design furniture-making shop, and lecturing and teaching extensively from coast to coast, I’ve written and illustrated many more books on woodworking. I’ve served as Contributing Editor to Fine Woodworking (1985–1999), and Popular Woodworking (1987–1996), and as Editor-in-Chief of Woodwork Magazine (1991–1994) before becoming a featured speaker and presenter at the National Woodworking Shows.

Graham's book list on traditional woodworking

Graham Blackburn Why did Graham love this book?

From witchets to moulding planes, from Roman tools to eighteenth-century American tools, this was my first "bible" on the subject. A more thorough grounding — with amazing photographs — would be hard to find. Reading this book puts two millennia of woodworking into a useful perspective. Once read it will illustrate in greater detail every other book on the subject. Totally essential.

By Henry C. Mercer,

Why should I read it?

1 author picked Ancient Carpenters' Tools as one of their favorite books, and they share why you should read it.

What is this book about?

Classic reference describes in detail hundreds of implements in use in the American colonies in the 18th century. Over 250 illustrations depict tools identical in construction to ancient devices once used by the Greeks, Egyptians, and Chinese, among them axes, saws, clamps, chisels, mallets, and much more. An invaluable sourcebook.


Book cover of Solid-Wood Cabinet Construction: 70 Contemporary Designs with Details

Scott Wynn Author Of Woodworker's Guide to Handplanes: How to Choose, Set Up, and Master the Most Useful Planes for Today Workshop

From my list on kicking your woodworking up a notch.

Why am I passionate about this?

I have been designing and building furniture professionally since before 1976. From the beginning I’ve had an avid interest in what might be called “appropriate technologies”— when to use a hand tool or power tool — that is, for a specific use, which one gives the best results for the least time and effort? If you read the journals of 18th Century woodworkers you’ll find they were unbelievably fast —using only hand tools. I believe that by the 1970s much of that knowledge and many of the tools themselves had been lost. I set out to rediscover them.

Scott's book list on kicking your woodworking up a notch

Scott Wynn Why did Scott love this book?

Franz Karg's book is a challenge: Design and build cabinets without any sheet goods—all solid wood— and make the designs exciting, the joinery accommodate stress and expansion and contraction while adding to the quality of design, or even inspiring the design. Working your way through these designs will kick your thinking and your construction approach up a notch!

By Franz Karg,

Why should I read it?

1 author picked Solid-Wood Cabinet Construction as one of their favorite books, and they share why you should read it.

What is this book about?

A master cabinetmaker shows how to build a wide array of lasting furniture for your living room, dining room and bedroom. Sharp photographs and detailed drawings provide the technical information needed to build wall cabinets and other pieces of furniture.


Book cover of The Impractical Cabinetmaker: Krenov on Composing, Making, and Detailing

Jeff Miller Author Of The Foundations of Better Woodworking: How to Use Your Body, Tools and Materials to Do Your Best Work

From my list on improving your woodworking.

Why am I passionate about this?

Jeff Miller is one of the country’s leading furniture designer/craftsmen. He is also a dedicated teacher and a prolific writer, with over 40 articles and 4 books (with a fifth in preparation). Jeff has exhibited furniture in shows from coast to coast, and has a piece in the permanent collection of the Chicago History Museum. Jeff’s work is heavily influenced by his former career as a professional musician, and he strives to make each of his pieces feel musical in some way. Jeff is a runner and – despite the hindrance of living in the flat mid-west – an avid skier. A substantial chunk of his time is taken up by dialysis treatments, but he tries not to let that slow him down too much.

Jeff's book list on improving your woodworking

Jeff Miller Why did Jeff love this book?

This is one of those books that has inspired generations of woodworkers to aim higher in their work, and to think about broad aspects of both designing for and building with wood. Krenov’s construction methods (using dowels) are idiosyncratic, but his intense approach to woodworking has had a profound impact. It is well worth a read.

By James Krenov,

Why should I read it?

1 author picked The Impractical Cabinetmaker as one of their favorite books, and they share why you should read it.

What is this book about?

James Krenov's delicate, lyrical cabinets have inspired a generation of wood craftsmen, as has his impassioned insistence that one do his very best work, no matter what. In this volume, first published in 1979, Krenov invites the reader into his workshop, where he shares his techniques and uncompromising approach to craftsmanship, along with thoughts about his work and its place in the world. Photo sequences show how Krenov composes a cabinet directly in the wood, without dimensioned drawings. He also discusses working with shop-sawn veneers, the technique of fitting curved doors, and the problems of accuracy and mistakes. The book…


Book cover of A Cabinetmaker's Notebook

Scott Wynn Author Of Woodworker's Guide to Handplanes: How to Choose, Set Up, and Master the Most Useful Planes for Today Workshop

From my list on kicking your woodworking up a notch.

Why am I passionate about this?

I have been designing and building furniture professionally since before 1976. From the beginning I’ve had an avid interest in what might be called “appropriate technologies”— when to use a hand tool or power tool — that is, for a specific use, which one gives the best results for the least time and effort? If you read the journals of 18th Century woodworkers you’ll find they were unbelievably fast —using only hand tools. I believe that by the 1970s much of that knowledge and many of the tools themselves had been lost. I set out to rediscover them.

Scott's book list on kicking your woodworking up a notch

Scott Wynn Why did Scott love this book?

Many would say Krenov’s approach stands in strong contrast to Frid’s books. Krenov’s books contain much valuable practical information, but I believe the great value of this book is in his attitude toward his work. It is— and I know this is an overused word — but I think it is inspirational.  He speaks clearly and in-depth about his approach to and interaction with his materials; their interplay with design and function; how the physical act of doing the work affects it; his attitude towards time, energy, genuineness, and patronage, and achieving the highest levels of art, craft, and satisfaction. Highly recommended for artists and woodworkers.

By James Krenov,

Why should I read it?

1 author picked A Cabinetmaker's Notebook as one of their favorite books, and they share why you should read it.

What is this book about?

Cabinetmaking at the highest level is an art, a discipline, a philosophy--even a way of life--in addition to being a useful craft. In this book one of the greatest living cabinetmakers reflects on the deeper meanings of his craft and explains for less accomplished workers how the right attitudes toward materials, tools, and time can increase the joys of this complex activity. Craftspeople in every medium will be inspired by this account of getting started and developing habits that lessen the difficulties of a complex craft.


Book cover of The Why & How of Woodworking: A Simple Approach to Making Meaningful Work

Jeff Miller Author Of The Foundations of Better Woodworking: How to Use Your Body, Tools and Materials to Do Your Best Work

From my list on improving your woodworking.

Why am I passionate about this?

Jeff Miller is one of the country’s leading furniture designer/craftsmen. He is also a dedicated teacher and a prolific writer, with over 40 articles and 4 books (with a fifth in preparation). Jeff has exhibited furniture in shows from coast to coast, and has a piece in the permanent collection of the Chicago History Museum. Jeff’s work is heavily influenced by his former career as a professional musician, and he strives to make each of his pieces feel musical in some way. Jeff is a runner and – despite the hindrance of living in the flat mid-west – an avid skier. A substantial chunk of his time is taken up by dialysis treatments, but he tries not to let that slow him down too much.

Jeff's book list on improving your woodworking

Jeff Miller Why did Jeff love this book?

This is a beautiful and thoughtful book. And much like others on this list, it offers up a personal take on woodworking. Mike feels that shop time should be devoted to engagement in the work, and offers up strategies for achieving that goal. He also offers beautiful projects, from simple to fairly advanced, that foster learning a slew of techniques for accurate work. The book also includes a discussion of design and its role for the woodworker.

By Michael Pekovich,

Why should I read it?

1 author picked The Why & How of Woodworking as one of their favorite books, and they share why you should read it.

What is this book about?

The Why and How of Woodworking reflects the growing appreciation for the handmade, a movement toward simplifying and uncluttering. There is a growing understanding of the need to fill our lives with meaningful and useful objects. How can woodworkers answer that call? Instagram sensation Mike Pekovich explains how to make work that is worth the time and effort it takes to make it, work that makes a difference, and work that will add to the quality of our lives. . Explains the basics of woodworking, from choosing lumber with care, cutting joinery accurately, and preparing and finishing the surfaces. .…


Book cover of By Hound & Eye: A Plain & Easy Guide to Designing Furniture with No Further Trouble

Michael Dresdner Author Of The New Wood Finishing Book

From my list on for woodworkers to expand their horizons.

Why am I passionate about this?

Michael Dresdner is a nationally known finishing and woodworking expert and guitar maker/designer, author of five books and several videos on wood finishing and guitar making. He’s been a Contributing Editor to Fine Woodworking Magazine, American Woodworker Magazine, and Woodworker’s Journal, wrote the Just Finishing byline column for American Woodworker Magazine for over 7 years, and the Finishing Thoughts byline column for Woodworker’s Journal for almost 20 years. While a consultant to one of the country’s largest coatings conglomerates, he wrote answers to over 8,000 questions for the www.woodanswers.com website blog and edited the Woodworker’s Journal eZine, an award-winning online woodworking magazine with over a quarter of a million subscribers.

Michael's book list on for woodworkers to expand their horizons

Michael Dresdner Why did Michael love this book?

Forget the tape measure. Leave the fractions, decimals, and mathematics behind. Long before the tape measure was a universal adornment on the woodworker’s belt, people designed furniture, houses, bridges, and cathedrals using nothing more than simple whole number ratios. This slender tome will show you how to do just that and will entertain you along the way. 

By George Walker, Jim Tolpin, Andrea Love (illustrator)

Why should I read it?

1 author picked By Hound & Eye as one of their favorite books, and they share why you should read it.

What is this book about?

Cartoon character, "Journeyman" and his dog, "Snidely" teach the basics of furniture making. Geometry is a major component of the instruction plus the basic tools of the trade are explained and applied to this art. A novice will truly learn the craft while an experienced carpenter will find this enjoyable reading.


Book cover of Hand Tools: Their Ways and Workings

Jeanie and David Stiles Author Of Cabin: A Guide to Building the Perfect Getaway

From my list on hand-illustrated books on building.

Why are we passionate about this?

As the authors of 27 hand-illustrated books, we are acutely aware of the time and skill required for good rendering. We are old-schoolers ourselves, having cut our teeth on “how-to” books before computers came into vogue. Our readers often tell us that a computer drawing does not have the same appeal and clarity as hand drawing. We are able to ‘talk’ a reader through the process of building something with our drawings. We have also found that the best illustrated books often have the best content!

Jeanie's book list on hand-illustrated books on building

Jeanie and David Stiles Why did Jeanie love this book?

Watson is both a talented artist and woodworker. He combines those skills in a number of books, but our favorite is Hand Tools. Everyone needs at least some hand tools in their shop, and they should know how to use them properly. Watson’s book contains 450 beautiful hand-drawn illustrations, in pencil, that beg to be framed and hung on the wall. The writing is close behind. 

By Aldren A. Watson,

Why should I read it?

1 author picked Hand Tools as one of their favorite books, and they share why you should read it.

What is this book about?

For those who would like to have the benefit of a woodworker's extensive experience with hand tools, this is the book to own. Crammed with practical information, it is the next best thing to looking over a craftsman's shoulder as he works with his tools, asking questions and getting straight answers in plain language, seeing how each tool is held and manipulated to get the best work out of it. From bit brace, chisel, and mallet to saws, specialized planes, drawknife, and spokeshave, Aldren Watson describes in detail the actions of the tools basic to good woodworking. All the procedures…


5 book lists we think you will like!

Interested in woodworking, furniture making, and carpentry?

Woodworking 27 books
Furniture Making 13 books
Carpentry 7 books